MCC/Stouts
1.Set
combo rod cutter ½” and 3/8 and ½” rod cutters
2.Cut
3.Nut
Plastic Pipe Cutters
- No.1 cutting performance in industry. Durability, Sharpness, & Anti-pipe- cracking. Three great features in one.
- Ergonomic Handle Design gives you less stress during operation.
- Quick Release Blade mechanism: It’s not necessary to open the handle with both hands to release the blade.
- Extreme Cutting Leverage Design: less effort & less work in operation.
- Simple Blade Exchange: Only two steps to exchange the blade. Less risk to lose any parts (except VC-0363)
- Compact Design: While still in a small and compact unit, the VC-0334 & 0348 still has the ability to cut larger pipe.
Made in Japan
We ONLY Stock VC-037 and VC- 0363
| VC-0327 | VC- 27ED | up to 27mm(1") | 260 g (0.6) | VCE0327 |
| StockVC- 0334 | VC-34ED | up to 34mm(1.1/3") | 290 g (0.6) | VCE0334 |
| VC-0342 | VC- 42ED | up to 42mm(1.5/8") | 420 g (0.9) | VCE0342 |
| VC-0348 | VC- 48ED | up to 48mm(1.7/8") | 400 g (0.9) | VCE0348 |
| VC-0363 | VC- 63ED | up to 63mm(2.1/2") | 650 g (1.4) | VCE0363 |
| AB-3U | 3/8" UNC | 766 (29") | 4Kg (8lbs) | ABE3U | YES |
| AB-43U | 1/2" & 3/8" UNC | 975 (37") | 7Kg (15 lbs) | ABE 4U & ABE 3U | YES |
Related Products
Foot Vises
- Lightweight and portable.
- Specially designed self adjusting jaws ensure the firm grip of pipes.
- Special heat treated jaws gives superior durability & years of reliable, trouble free services.
RNR has a good stock of all three-foot vices
Made in Japan
| FV-0110 | 390 | 40mm (1/2-1.1/4") | 2.8 |
| FV-0120 | 460 | 63mm (1.1/4-2") | 5.5 |
| FV-0130 | 360 | 165mm (1.1/2-6") | 6.5 |
Toothless Spud Wrench
Smooth surface of jaw avoids any scratch or damages on plumbing surface. Ideal for finishing work such as kitchen, bathroom and restroom plumbing.
Made in Japan
| TWMA-260 | 260 | 0.28 | 70mm | 100kgf |
Threaded Rod Wrenches
- Grabs threaded rod without damaging by the unique lock mechanism.
- Take this pocket size tool instead of pliers for threaded rod installation
Made in Japan
Threaded Rod Sockets
- Put on Cordless Drill to tighten or loosen threaded rod in seconds without damaging thread.
Made in Japan
Threaded Rod Chasers
- Palm size chaser fixes threads quickly!
- Cleans the cut end in case there are any burrs left due to improperly setting threaded rod in MCC Threaded Rod Cutter while cutting or cutting low quality threaded rods with damaged threads
- Double sided cutting edge
- Dual size available (ABCH-430)
Made in Japan
| ABCH-030 | 3/8"-16UNC | 1/3 lbs | 1.75" |
| ABCH-430 | 1/2"-13 UNC & 3/8"-16 UNC | 1/3 lbs | 1.75" |
